Answers to some of the most common installation questions...

Can the film be removed without damage?
Color Films film can be easily removed without damage to the light or original paint. Upon initial application, the film can be pulled back up and reapplied numerous times if not installed correctly. The film and adhesive is forgiving enough for this. Once the film is settled (appx 48-72 hours) the product is not considered to be reusable. Upon removal warm the film and lift off slowly.

Why do you sell some films uncut?
Couple of good reasons for this. Sometimes we do not have a precut kit available for your specific make or model. Examples would be older vehicles or custom lights or body panels. Applying an uncut sheet is just as easy and more forgiving. Secondly, uncut sheets do not need to be perfectly aligned to fit properly. Just cover the desired area and custom trim fit to your specifications and liking.

How do I know which bulk size film to purchase?
Measure the surface area where the film is going to be applied. Take into consideration any bends or compound curves that may need the material to bend when wrapping. Then choose the most applicable size for your need. Please contact us if you require a more custom size than what is listed.

Are your colored films legal on headlights for street use?
Our colored films may not be legal for street use on primary lighting. An off-road disclosure is recommended. Please check your state or local laws before application. Installation of colored Color Films Films on your primary lights is done so at your own peril. None of our films produce a blue or red light when lit.

I just installed the film on my lights. There are still some tiny bubbles and milkiness underneath and creases/ripples on top of the film. What should I do?
Once the film settles any small bubbles/milkiness or application creases will disappear. Color Films is a breathable PVC vinyl film. Tiny air pockets will evaporate. The creases/ripples caused by application cards or your finger will smooth out once settled and warmed.

What's the difference between your film and your competitors?
Numerous things make our product more appealing than others, such as:
- Our films are impact resistant and a softened PVC vinyl film. Most competitor films are not impact resistant and have a top-coated urethane film.
- Installation errors can be corrected and repaired upon installation.
- Our film is breathable for quicker curing and allows for newly applied paint to fully cure.
- Resists yellowing with minor yearly maintenance.
- Multiple colors and thicknesses available for multiple uses. Competitors only have clear films. No colors available.